Medium Frequency Induction Heating Equipment Small Heat Treatment
Forging Equipment
Heating principle of intermediate frequency induction heating
equipment:
The magnetic beam is generated by flowing a high-frequency
alternating current to a conductor (usually a copper tube) that is
curled into a ring shape. When the metal is placed in it, the
magnetic beam will pass through the metal body, and eddy currents
(rotating currents) will be generated in the direction of the self
payment of the magnetic beam. This induced current generates heat
under the influence of the eddy currents. This heating method is
induction heating.
Technical parameters of high frequency induction heating equipment:
Model: LC-ZP-175KW
Maximum input current: 175A
Input power: 175kW
Oscillation frequency: 21khz
Input voltage: 370v
Host volume:363mm×363mm×463mm
Cooling water pressure: 0.1-0.3mpa
Cooling water flow (main engine): 15L / min (0.1MPa)
Cooling water flow (transformer): 18L / min (0.1MPa)
Water temperature protection point: 50 ℃
Host weight: 40 ± 5% kg
Efficiency: 90%
Application fields of medium frequency induction heating equipment:
1. Crankshaft, connecting rod, piston pin, crank pin, sprocket,
camshaft, valve, various rocker arms and rocker shafts; 2. High
frequency quenching treatment of various gears, spline shafts,
transmission half shafts, small shafts and shift forks in the
gearbox.
3. High frequency quenching of gears and shafts on various electric
tools.
4. Heat treatment for high frequency quenching of various hydraulic
components and pneumatic components. Such as a column of a plunger
pump.
5. Plug, rotor of rotor pump; Quenching of reversing shafts on
various valves and gears of gear pumps. 6. Heat treatment of metal
parts. Such as high frequency quenching of various gears,
sprockets, shafts, spline shafts, pins, etc.
7. Quenching of machine tool surface guide rails in the machine
tool industry.
