Product Parameters:
| NO. | Product model | Unit | LC-B-6kw | LC-B-8kw | LC-B-10kw | LC-B-12kw | LC-B-15kw |
| 1 | Rated power | KW | 6 | 8 | 10 | 12 | 15 |
| 2 | Rated current | A | 27.3 | 36.4 | 45.5 | 48.2 | 52.8 |
| 3 | Heating area | ㎡ | 60-80 | 80-100 | 100-120 | 120-140 | 150-180 |
| 4 | input voltage | 50HZ | 220V | 220V | 220V | 220V/380V | 220V/380V |
| 5 | Minimum flow of water pump configuration | L/min | 15 | 15 | 20 | 20 | 25 |
| 6 | Hot water yield 50 ℃ | L/min | 5.62 | 3.75 | 4.69 | 5.62 | 6.9 |
| 7 | Design thermal efficiency | ℃ | 98% | 98% | 98% | 98% | 98% |
| 8 | Maximum water temperature | ℃ | 85 | 85 | 85 | 85 | 85 |
| 9 | Low temperature protection temperature | ℃ | 5 | 5 | 5 | 5 | 5 |
| 10 | Overall dimension (length * width * height) | mm | 360*170*630 | 360*170*630 | 360*170*630 | 360*170*630 | 360*170*630 |
| 11 | Water inlet and outlet interface | DN | 32 | 32 | 32 | 32 | 32
|
Product Details:
Why choose us ?
What are the advantages of wall mounted electric boilers
1. High thermal efficiency
The heat conversion rate of the high-frequency electromagnetic
heating technology is as high as 95%, and the hot water is produced
in 5 minutes. The electromagnetic eddy current heating is not easy
to scale. The life of the whole electromagnetic heating boiler
system is prolonged, the thermal efficiency is stable, and the
maintenance is very simple.
2. Environmental protection and energy saving
The electromagnetic heating boiler does not burn, has no open fire,
and has no pollution emissions. Truly make the boiler green.
3. Safe and reliable
The water and electricity of the whole machine are completely
separated. The front circuit, the rear water path, the internal
water flow and the external electricity flow. The power of the
product is controlled by the weak current, and there are various
alarm functions such as current, water and overtemperature. It is
safe and reliable to use.
4. Intelligent control
It adopts microcomputer control, visual LED interface, touch screen
operation, timing function, etc. the water temperature can be
adjusted at will between 25-85 degrees.
5, non-contact heating, water and electricity separation, 100% to
solve the safety problem.
Power saving method of wall mounted electric boiler:
Different house structures, room heights, lighting areas and room
positions have different heat loads. The power of the
electromagnetic heating furnace must be calculated according to the
heat load of the heating room. The power of the electromagnetic
heating furnace used by users often fails to meet the requirements
of the room heat load, which not only causes the electromagnetic
heating furnace not to stop or rarely stops, but also fails to
reach the ideal heating temperature.
By adjusting the thermostatic valve of the radiator, the
temperature of the room can be freely adjusted. We can lower the
temperature of the thermostatic valve of the radiator in the rooms
that are not frequently accessed, such as the auxiliary bedroom and
the storage room, so as to better save the operation during the
heating period.
The working principle of the electromagnetic heating furnace is
intermittent work. When the water supply temperature is less than
the upper limit temperature, the electromagnetic heating furnace is
in the heating state. When the water supply temperature reaches the
upper limit temperature, the electromagnetic heating furnace is in
the shutdown state for thermal insulation.
