Electric Heater Boiler:750Kw Heating Area: 7500-10000㎡ Water And Electricity Separation Of Electric Heating Boiler

How To Repair The Electric Heater Boiler:

1. The boiler feed water of electric heater must be strictly treated to prolong the boiler life. As an important matter to ensure operation safety, the quality of soft water treatment shall be implemented according to relevant standards.

2. The feed water temperature shall be as close as possible to the furnace temperature and shall be higher than 20 ° C.

3. It is very important to ensure the normal operation of water level control. Water shortage is one of the main causes of boiler accidents and damages. It is necessary to regularly check and maintain the low water level cut-off device. If one flushing is not clean, the flushing water level gauge shall not be lower than the safe water level at the bottom. It can be rinsed many times, but it must be rinsed at high water level. The steps for flushing the water level gauge have been described in detail above.

4. In order to remove the slag and sludge at the bottom of the electric heater boiler and reduce the concentration of boiler water, regular blowdown must be carried out. At least once a day, and the pollutant emission rate shall not exceed 3%. After blowdown, regularly check whether the blowdown valve leaks due to the influence of dirt. If so, it must be eliminated and the water level maintained. Please refer to the flushing method of water level gauge.

Electric Heater Boiler Technical Parameter:

Safety Measures For Use Of Electric HeaterBoiler:

Safety protection must be strengthened when electric heater boilers are used. With the rapid development of electromagnetic heating furnace industry, electric heater boilers have been widely used. Electric heater boilers are used in thousands of households. We must ensure the strengthening of safety protection awareness when using them. Only in this way can we ensure the safe and normal operation of electric heater boilers and avoid various safety accidents.

Shenyang Lincheng Electric Appliance Technology Co., Ltd. has a registered capital of 50million yuan. Its production base is located on Jiayang Road, Shenbei New District, Shenyang. It is a scientific and technological enterprise specializing in the research, development and production of high and medium frequency induction heating equipment, electromagnetic induction heating equipment and energy storage equipment.

The company has equipment standard swab laboratory and advanced inspec-tion and testing equipment, using high-power power elec-tronic IGBT, MOSFET devices,so that the product is modular, integrated,automatic, efficient, energy-saving, stable and reliable.

The company's products are energy-saving, safe,clean,water and electricity separation, easy to operate,heating time and temperature can be set arbitrarily, and can be connected with mobile phoneand computer. It is used for heating and hot water in various occasions.

We also developed energy storage products suitable for general industry and commerce, civil industry, and large industrial grid-connected and off-grid end, with power levels ranging from KW to MW.